3 operation, 4 packaging, transport and storage – VEGA VEGAPULS 66 (≥ 2.0.0 - ≤ 3.8) 4 … 20 mA_HART four-wire User Manual
Page 10
T
he background lighting of the indicating and adjustment module is
powered by the sensor. A certain level of operating voltage is required
for this. You can find the exact voltage specifications in chapter
"
Technical data".
3.3 Operation
VEGAPULS
66
can be adjusted with different adjustment media:
l
with indicating and adjustment module
l
with the suitable VEGA DTM in conjunction with an adjustment
software according to the FDT/DTM standard, e.g. PACTware and
PC
l
with manufacturer-specific adjustment programs AMS™ or PDM
l
W
ith a HART handheld
T
he entered parameters are generally saved in VEGAPULS 66,
optionally also in the indicating and adjustment module or in
PACT
ware.
3.4 Packaging, transport and storage
Y
our instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
according to DIN EN 24180.
T
he packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE foil
is also used. Dispose of the packaging material via specialised
recycling companies.
T
ransport must be carried out under consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
T
he delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or
concealed defects must be appropriately dealt with.
U
p to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
U
nless otherwise indicated, the packages must be stored only under
the following conditions:
l
N
ot in the open
l
D
ry and dust free
l
N
ot exposed to corrosive media
l
P
rotected against solar radiation
l
A
voiding mechanical shock and vibration
Packaging
Transport
Transport inspection
Storage
10
VEGAPULS
66 • 4 … 20
mA/HART four-wire
3 P
roduct description
28443
-EN
-090305