VEGA VEGADIS 371 Ex - Manual (Page 9)

VEGADIS 371 Ex 9
Set-up
4 Set-up
4.1 Indicating and adjustment elements
1 Slide switch
2 Relay control lamps (1 … 4)
3 Plus key
4 Minus key
5 Cover
6 Shackle
7 Rotating switch
8 Digital indication The figures in brackets relate to the information in
figure 4.1.
To open the cover (5), insert a screwdriver into the two
slots marked with arrows.
Turn the screwdriver by a quarter turn and the cover
(5) opens.
To protect the instrument against unauthorized
adjustment, the cover (5) of VEGADIS 371 can be
sealed. Insert the seal wire with closed cover in the top
left corner through the hole of the lug.
Designation :
In practise it has proven to mark VEGADIS. Informati-
on on the appropriate measurement loop and the unit
of the indicated value help to avoid failures and
misunderstandings. On the housing a shackle (6) is
provided for designation. Here you can insert one of
the supplied labels.
8
7
6
5
4
3
2
1
Fig. 4.1