VEGA VEGADIS 371 Ex - Manual (Page 15)

VEGADIS 371 Ex 15
relay module (see "4.2 Adjustment“).
4.4 Reset
You can carry out a reset on VEGADIS 371. Hence all
adjusted values are reset to the original factory setting.
• Interrupt the supply voltage of VEGADIS 371.
• Push the plus and minus key (3 and 4) together and
hold the two keys pushed. Switch on the supply
voltage. The display indicates "-RES-“. The
instrument carries out a reset.
VEGADIS 371 has the following fatory setting (Reset-
Default values).
Factory setting
Menu stage 1
- Relay switch on points
(10,0 %)
- Relay switch off points (100,0 %)
- Display min. (0)
- Display max. (100)
- Decimal point (1. position)
- Integration time (0 s)
- Offset correction (0 μA)
- Current output (4 … 20 mA)
Menu stage 2
- Pump changeover function
(OFF)
- Working time indication (0 hours)
Set-up