VEGA VEGAWELL 72 4 … 20 mA_HART - Manual (Page 6)

D uring the entire duration of use, the user must make sure that
the occupational safety measures taken always comply with
current valid policy as well as new regulations.
2 .5 Safety approval markings and safety tips
T
he safety approval markings and safety tips on the device
must be observed.
2 .6 CE conformity
VEGAWELL 72 is in CE conformity with EMC (89/336/EWG)
and LVD (73/23/EWG).
C
onformity has been judged according to the following
standards:
l
EMC:
-
E
mission EN 61326: 1997/A1: 1998 (class B)
-
S usceptibility EN 61326: 1997/A1:1998
l
LVD: EN 61010-1: 1993
2 .7 Fulfilling of NAMUR recommendations
W ith respect to interference resistance and emitted interfer-
ence, the NAMUR recommendation NE 21 is fulfilled.
W
ith respect to compatibility, the NAMUR recommendation
NE 53 is fulfilled. This applies also to the corresponding
indicating and adjustment components. VEGA instruments are
generally upward and downward compatible.
l
S
ensor software for DTM VEGAWELL 72 HART
l
DTM VEGAWELL 72 for adjustment software PACTware
T
he parameter adjustment of the basic sensor functions is
independent of the software version. The range of available
functions depends on the respective software version of the
individual components.
T he software version of the instrument can be read out via
PACT
ware.
Y ou can view all software histories on our website www.vega.
com. Make use of this advantage and get registered for update
information via e-mail.
6 VEGAWELL 72 • 4 … 20 mA/HART
2 F or your safety
27630
-EN
-080806