VEGA VEGAWELL 72 4 … 20 mA_HART - Manual (Page 31)

4
3
2
5
6
7
1
Fig. 14: Configuration of the cable seal
1
Connection cable (up to 6 pieces depending on the version)
2 Cable screen
3 Breather capillaries with filter element
4 Seal cone
5 Suspension cable
6 Cone bushing
7 Seal screw
6 C ut the suspension cable with an edge cutter to the
requested length
7 R
emove approx. 10 cm of the cable mantle, strip off
approx. 1 cm of the wire ends, insert the filter adapter
8 S hift the seal screw, cone sleeve and seal cone to the
suspension cable and insert the cable into the screwed
socket, insert the wire ends through the cable entry into the
mounting plate
T he work steps are finished.
8 .4 Instrument repair
I
f a repair is necessary, please proceed as follows:
Y ou can download a return form (23 KB) from our Internet
homepage www.vega.com under: "Downloads - Forms and
certificates - Repair form".
B y doing this you help us carry out the repair quickly and
without having to call back for needed information.
VEGAWELL 72 • 4 … 20 mA/HART 31
8 M aintenance and fault rectification
27630
-
EN
-080806