Wiha Tools L-Keys - Manual (Page 6)

115
www.wiha.com
Advantages
• Fastenings at angles up to 30° per side
• Quick feeding of the key into the screw thanks to feeding from various angles
• The key does not slip out of the screw, which reduces the risk of accidents
• No deformation of the screw head thanks to precision fitting of the ball end
• Fastenings at angles up to 25° per side
• Higher torque transmission due to maximum core diameter
• Elongated profile positioning for further use of the L-key
• Thanks to the combination of MagicRing ® with the Wiha ball end,
inserting and removing screws is possible, even in hard-to-reach locations
• Securely holds screws made of steel and non-magnetic materials such as stainless
steel, titanium, aluminium and plastics in any position
• Can be used for all standard screws
• Use for applications in which magnetised fastening tools cannot and may not be used
(magnetic environment)!
• Fastenings at angles up to 25° per side
• Securely holds screws made of steel and non-magnetic materials such as stainless
steel, titanium, aluminium and plastics in any position
• TORX ® and TORX PLUS ® screws manufactured according to Camcar Textron
specifications
• Use for applications in which magnetised fastening tools cannot and may not be used
(magnetic environment)!
• Reduction of the short L-key arm, especially for hard-to-reach screws
and confined spaces
• Increase in the hand working space of over 30% and thus a reduction of the risk
of injury to the knuckles and fingertips thanks to a 95° bend of the L-key
• Improved access through a reduction of the L-key head height of up to 15%
• Ball end geometry enables fastening at an angle of up to 25°
• Handles and holders in the same colour depending on the output size
• This provides an overview of the tool assortment
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 115