Wiha Tools L-Keys - Manual (Page 46)

155
www.wiha.com
Wiha flag and key handle.
The knack of applying just the right amount of pressure.
Innovative torsion blade in sizes T5 to T10
does not damage the expensive fastening
screws or the tool profile.
The small, 7-piece bench stand ensures
a tidy working environment.
The flag and key handles have large
support surfaces for thumb and index
finger for ease of use and efficiency.
Screwdrivers with flag or key
handles are used whenever
replacing indexable inserts
on milling heads. Thanks to the
large support area for thumb and
index finger, it is possible to loosen
or tighten any screw with comfort
by applying just the right amount
of pressure. These tools are also
particularly suitable for high-torque
adjustment work. Wiha flag and key handle.
• Large support areas for thumb
and index finger on the
ergonomically shaped handles.
The transmission of high
torques is thus quite simple
• Cylindrical handle shaft for
quick turning of screws
• Innovative torsion blade
for T5 to T10 greatly reduces
the risk of breakage. Thus,
broken profiles in the screw
head are largely avoided.
If more torque than required is
applied, the blade responds
elastically (cf. picture)
• Thanks to thin blades,
even covered screws in the
screw axis can be turned
EN_s110-157_Stift_2012 15.02.12 13:37 Seite 155