Wiha Tools L-Keys - Manual (Page 27)

136
With elongated TORX ® profile behind ball
end.
Tight spaces that only allow
fastening and unfastening in at
an angle: In these "problem zones"
for TORX
® screws, Wiha TORX ® ball
end tools are in demand.
The advantages for the user are
obvious: With the improved
geometry of the ball end, TORX
®
screws can now be screwed in
and out even at angles up to 25°.
As a result, maximum torques are
no longer a problem even in
difficult installation positions. We-
aring of the tool and screw head is
noticeably reduced.
And Wiha is also pursuing a diffe-
rent path in production. Thanks to
an innovative manufacturing pro-
cess, cold forming, the TORX
® ball
end gains a great deal of strength.
So that these advantages benefit a
broad range of applications, the
Wiha TORX ® ball end.
Simpler, more powerful, safer.
Plenty of room to manoeuvre: The ball
end enables access to the TORX
® screw
at an angle of up to 25°.
Wiha TORX ® ball end is integrated
in several types of tools and is
available in proven Wiha quality:
• as an L-key in sizes T9 to T40, se-
parately or as a set with a holder
• as a bit with the lengths 50, 70
and 90 mm
• as a screwdriver with the ergono-
mic SoftFinish ® handle, through-
hardened, brushed
chrome-plated blade and preci-
sion-fitting ChromTop
® blade tip
Thanks to their ruggedness, flexibi-
lity and diversity, Wiha TORX
® ball
end tools are indispensable for any
user who has to depend on a long
tool life under difficult working con-
ditions.
Wiha TORX ® ball end.
• With optimised TORX ® ball end
geometry
• Increased strength thanks to
the special cold forming on a
system developed by Wiha
especially for this purpose
• Enables fastening and
unfastening at angles of 25°
• Simple insertion of the tool/bit
and fastening/unfastening,
especially in hard-to-reach
locations
• Broad product range:
As an L-key, as a bit and as
a SoftFinish
® screwdriver
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 136