VTech DS6522-3-32-4 Abridged manual - Manual (Page 6)

6
Pair and connect your first Bluetooth cell phone
Press and hold 1/ 2 on the telephone base for about four seconds. You
hear two beeps and the 1/ 2 light blinks.
Turn on the Bluetooth feature of your cell phone. Once your cell phone finds
your VTech phone ( VTech DS6520/DS6521/DS6522), press the appropriate
key on your cell phone to continue the pairing process.
Your cell phone may prompt you to enter the PIN of the telephone base. The
default PIN of the telephone base is 0000.
If the pairing fails, turn off the Bluetooth feature on your cell phone and on the
DS6520/DS6521/DS6522 by pressing 1/ 2. Then repeat the steps above to
pair and connect again.
In some cases, it may take you a few attempts to complete the pairing process.
Download directory
Press MENU when the phone is not in use.
Scroll to Bluetooth, then press SELECT.
Scroll to Download dir, then press SELECT.
Scroll to select the desired cell phone, then press SELECT.
For certain cell phones, you may need to press a key on your cell phone to
confirm the directory download.
The performance of directory download feature depends on the compatibility of
your Bluetooth cell phone. Refer to the user’s manual of your cell phone for more
information about how that device uses Bluetooth connectivity.
For Android cell phones, you may also download your
cell phone directory to your DS6520/DS6521/DS6522
via the VTech Contact Share application. Go to
www.vtechphones.com/apps/contact_share for
application download.
Using the handset menu
Press MENU when the phone is not in use.
Press or until the screen displays the desired feature menu.
Press
SELECT to enter that menu.
To return to the previous menu, press CANCEL.
To return to idle mode, press and hold CANCEL.
Telephone settings
Default settings are indicated by asterisks(*).
Settings menu Description Options
LCD language Set the screen display language. English*
Français
Español
Clr voicemail Turn off the voicemail indicators (see the
note below).
Reset VM Icon?
Key tone Turn an audible beep on or off whenever a key
is pressed.
Key tone:On*
Key tone:Off
Home area code Enter your home area code if you dial only
seven digits for local calls.
Home area code
_ _ _
Dial mode Set the telephone to be touch-tone or
pulse dialing.
Touch-tone*
Pulse
Use the Clr voicemail feature when the telephone indicates there is new voicemail
but there is none. For example, when you have accessed your voicemail while away
from home. The Clr voicemail feature only turns off the indicators; it does not delete
your voicemail messages. As long as you have new voicemail messages, your
telephone service provider continues to send the signal that turns on the indicators.
The following are some of the telephone features you may wish to set. Refer to
Telephone settings in the online Complete user’s manual for detailed instructions
on setting all telephone features.
Ringer volume (handset)
You can adjust the ringer volume level, or turn the ringer off.
Press MENU when the handset is not in use.
Scroll to Ringers then press SELECT.
Scroll to choose Home volume or Cell volume, then press SELECT.
Press or to adjust the volume, then press SELECT to save.
If the handset ringer volume is set to off, that handset is silenced for all incoming
calls except paging tone.
.
2.
•
•
.
2.
3.
4.
•
•
•
.
2.
3.
•
•
•
.
2.
3.
4.