SUUNTO D6 - Manual (Page 70)

CHANGING GAS MIX. SCROLL
THROUGH ENABLED MIXES BY
PRESSING THE UP OR DOWN
BUTTONS. SELECT NEW MIX BY
PRESSING THE SELECT BUTTON.
NOTE Mix number, O
2
%, and PO
2
for the mixes are shown when
scrolling. If the set PO
2
limit is exceeded , it will be shown with
the PO
2
value blinking. The dive computer does not allow you to
change to a gas whose set PO
2
is exceeded. In such a case, the
mix is shown but cannot be selected.
NOTE If no button is pressed in 15 seconds, the dive computer will go
back to the dive display without changing the gas mix. Upon
ascent, the computer prompts you to change gas when the PO
2
level you have set for the next mix allows a gas change.The
prompt is an audible 3 beeps and the current O
2
mix starts to
blink.
6.3. Diving in GAUGE mode (DIVEgauge)
If set to GAUGE mode, the dive computer can be used as a bottom timer or as a
freediving instrument.
70