V-Tech C5-IPC Info - Manual (Page 2)

1. Parts and Functions
2. Unit Mounting
109mm
124mm
Direct Wall Mounting DIN Rail Mounting
JWB(IN)
S1
RS485 POWER
JWB(OUT)
CN(MDS) ETHERNET
JTAG POWER PA
IN-USE
LINK
VR600
JP1/2/3 SW1
* PA: Reset button. Press and hold for 3s to
initialize C5-IPC; If initialization complete
successfully, power off, and re-power C5-
IPC, LINK&IN-USE indicators will flicker
once simultaneously, then INK indicator will
flicker till IN-USE indicator is always ON
* S1: DIP Switch. Refer to DIP Switch Setting
* JTAG: PC Port. Update C5-IPC program by
PC that is connected by RS232 convertor
* RS485: PC Port. Set parameters update
the firmware of C5-IPC by PC RS485-USB
convertor
* JWP: Power Input P+: Positive,18V; P-:
Negative
* JWB (IN): Bus Signal Input. RJ45 port includes audio, data & video. It can be connected to door
station only
* JWB (OUT): Bus Signal Output. RJ45 port includes audio, data & video. It can be connected to
distributor.
* CN-MDS: Bus Signal Input. RJ45 port,connected to MDS only
* CN-NET: RJ45 Network Port, connected to LAN
* JP1/JP2/JP3: Jumper. Removed if C5-MDS connected
* SWI: Distributor Setting. Match different distributor