V-Tech VT24 Manual - Manual (Page 8)

5. Basic Door Release Operation
Answering a Door Call
1. Press the CALL button on door station.
2. The monitor rings,and the visitor's image will be seen on screen.
Note:the screen turns off after 40 seconds if nobody answers.
3. Press TALK Button on monitor(the LED will transform to red color), you can
communicate hands free(if the monitor takes with handset,pick up handset to talk)
with the visitor for 90 seconds.After finishing communication,press TALK button
again to end the communication.If the system connects two or more Monitors, pick
up any Monitor, the others will be automatically shut off.
DS1 00:30
1 2 3 4
Status bar
► 1.show the current door station for monitoring.
► 2.show the waiting time for calling.
► 3.if the monitor is set to silence mode,this icon
will be shown.
► 4.if the system connect VT-RLC module which
control light,and the Staircase Light item is set
to 1or 2 (refer to part 9->>Staircase Light),this
icon will be shown when receive calling.
Door Release
During talking or monitoring state, Press Unlock Button to release the door for the
visitor.
Entrance Monitoring
When the monitor is in standby mode, press TALK Button, The screen can display
the view of outside. If multi door stations are installed,press TALK Button,then
touch Cancel button (or select Monitor item on main menu page) to get into the
camera switch mode. Select DS 1/2/3/4 to monitor the door station or CCTV camera
you want.See the following diagrams.
-7-