Velleman VM130 User Manual
Page 4

4
Specifications - features - Transmitter instructions
FEATURES
Two relay contact outputs (5A resistive load).
ON/OFF (toggle) or timer-mode (pulse)
Learning unique 32-bit random code.
Up to 31 different transmitters can be stored.
Code memory can be erased for safety purposes.
Internal heating option for cold environment
Specifications and features
SPECIFICATIONS
Receiver:
Power supply : 9 to 13Vac or 10 to 15Vdc / 130mA max.
Selectable timers per output: 0.5, 5, 30s / 1, 5, 15, 30, 60min.
Open field range of up to 30m.
Transmitter:
12V battery type: V23GA, GP23GA...
CE compliant 433MHz operation.
Over 1.000.000.000 combinations.
Transmitter instructions
The transmitter comes with a factory set default code.
Open the enclosure :
Changing the code :
Return to the default code :
SW3
SW1
SW2
LED
open
1. Hold SW1* (left button)
2. Briefly press the 'program'-button (SW3) 3 times. The LED will flash 3 times.
3. Release SW1.
4. Your unique 32-bit code has been generated and stored.
1. Hold SW1 (left button).
2. Hold the 'program'-button (SW3). After +/- 10s the led will flash 5 times.
3. Release both buttons.
4. Your code has been reset to the default code.
SW1= CHANNEL 1, SW2= CHANNEL 2
(*If you hold SW2 (right button) instead of SW1 (left button), the unit will generate and store your
unique 32-bit code and the transmitter will be configured in such a way that continuous transmission
is not possible i.e. if you hold either button transmission will stop after a +/- 1s)
VM130G'1_rev3.pub
page 4
Friday, January 25, 2013 11:08