Velleman VM152 - Manual (Page 5)

5
Operation
For led dimming there are 2 possibilities, you can control directly on the receiver or with the remote.
CONTROLLING ON THE RECEIVER :
CONTROLLING WITH REMOTE CONTROL :
LEARN A REMOTE :
Keep button 3 & 4 pressed, the led blinks for a few seconds. Pres button 7 of the remote to learn, keep at the same time
button 3 & 4 pressed! The led's blinks to confirm that the remote has been stored.
At full memory led keeps blinking!
3 4
Dim
down
Dim up Automated slow on/off Erase all remotes
Press
button 3
Press
button 4
keep button 4 pressed en press
button 3 briefly.
Power off.
Press button 3 & 4 while powering on.
Led's will blink to confirm, when LED's are
extinct release button 3 & 4.
7
8
Dim
down
Dim up Automated slow on/off Cancelling automated slow on/off
Press
button 8
Press
button 7
keep for a second button
8 & 7 pressed.
keep button 8 pressed until LED's are extinct.
Operation
vm152G'1_rev2.pub
page 5 Wednesday, September 26, 2012 14:16