Cw-11 indicator – Ohaus CW-11 Indicator User Manual

Page 18

CW-11 Indicator

UNITS SELECTION

Press G/N/T/MENU button, Un OFF g is displayed.

Press PRINT/UNITS button, and select ON or OFF.
OFF is the default setting.

Press G/N/T/MENU button, Un ON lb is displayed.
This is unit pounds which can be turned ON or OFF.
This will be displayed when CAL UNIT kg was
selected. When lb was selected as calibration unit,
kg will display.

Press PRINT/UNITS button,and select ON or OFF.
ON is the default setting.

Press G/N/T/MENU button, Un OFF oz is displayed.
This unit is ounces which can be turned ON or OFF.
Default setting is OFF.

Press PRINT/UNITS button,and select ON or OFF.

NOTE: If CAL Unit is kg, then UNIT kg is fixed to ON
menu not shown. The same if CAL Unit is set to lb.

ALTERNATE MODE - Not available if LFT is ON.

Press G/N/T/MENU button, ALtOFF is displayed.
This enables either animal weighing or simple parts
counting functions. The alternate mode can be
turned off so that neither mode is available. It is not
possible to have both modes activated at the same
time.

Press PRINT/UNITS button, and select either OFF,
ALtAn i (animal) or ALt PC (parts counting). OFF is
the default setting.

2.8 Initial Setup (Cont.)

2.8.5 Readout Menu (Cont.)

Procedure

l b

k g