Ohaus PIONEER ANALYTICAL AND PRECISION BALANCES Manual fr - Manual (Page 3)

EN-1 Pioneer ™
1. INTRODUCTION
1.1 Safety Precautions
Please follow these safety precautions:
• Verify that the AC Adapter input voltage matches the local AC power supply.
• Use the balance only in dry locations.
• Do not operate the balance in hostile environments.
• Do not drop loads on the platform.
• Do not place the balance upside down on the platform or platform mounting cone.
• Service should be performed only by authorized personnel.
1.2 Controls
No Yes
Button:
Functions:
O/T - On Short Press: Turns balance on, sets display to zero
Off Long Press: Turns balance off
Yes Short press (Menu): Selects or accepts setting
Unit Short Press: Steps through active units and modes
Menu Long Press: Enters Menu
No Short press (Menu): Steps through available settings
Long press (Menu): Exit menu or abort out of menu item
Print Short Press: Sends data
Cal Long Press: Initiates Span Calibration
2
. INSTALLATION
2.1 Package Contents
0.1g and 0.01g Models 0.001g and 0.0001g Models
Instruction Manual Instruction Manual
Power Adapter Power Adapter
Balance Balance
Pan Pan
Pan Support Glass Doors and Panels
Wind-Ring (InCal models only) Warranty Card
Warranty Card