In-service cover accessory kit, Standard, Plus – Ohaus TS Series Electronic Balance User Manual

Page 57: For precision, Electronic balances, Installation instructions

In-Service Cover
Accessory Kit

P/N 76901-30

Ohaus Corporation

29 Hanover Road

Florham Park NJ

07932-0900

For PRECISION

Standard

and

Plus

Electronic Balances

Installation Instructions

P/N 76902-30 R1198

Ohaus Corporation
29 Hanover Road,
Florham Park, NJ 07932, USA
Tel: (973) 377-9000,
Fax: (973) 593-0359

With offices in England, Germany, France, Spain, Italy, Poland, Mexico,
Japan, Korea and China.

COVER

ADHESIVE

PAD

UNPACKING

The kit includes a cover and one adhesive pad.

INSTALLATION

Remove the pan and
pan support from the
balance.

Place the cover over the
balance as shown in the
diagram. If desired, the
adhesive pad may be
used to secure the cover
to the balance to avoid
possible movement.

Peel the backing off of
one side of the adhe-
sive pad, center adhe-
sive pad over hole in
top cover and press the
pad onto the top of the
balance as shown in the
diagram.

Remove the backing from the top of the pad, place the cover on the balance and
press down on the pad.

Replace the pan and pan support.