GE Healthcare iVent201 - Manual (Page 3)

Basic Description
Specifications
2 Additional Alarms and Indicators
©2011 General Electric Company – All rights reserved.
GE and GE Monogram are trademarks of General Electric Company.
*iVent, Easy Exhale, Adaptive Bi-Level, Adaptive Flow and Adaptive I-Time
are trademarks of General Electric Company.
VersaMed, a General Electric Company, doing business as GE Healthcare.
General Electric Company reserves the right to make changes in specifications and features
shown herein, or discontinue the product described at any time without notice or obligation.
Contact your GE Representative for the most current information.
CAUTION: USA Federal law restricts this device to sale by or on the order of
a licensed physician.
DOC0982719 Rev.1
2. Some ventilation modes and features are optional and may vary according to the
selected model.
GE Healthcare
P.O. Box 7550
Madison, WI 53707-7550, U.S.A.
Tel 800-345-2700
www.gehealthcare.com/RespiratoryCare
Ventilation Performance and Controlled Parameters
Respiratory rate: 1 to 80 bpm
Tidal volume: 50 to 2,000 ml
Inspiratory pressure limit: 5 to 80 cm H
2
O
Inspiratory time: Adaptive I-Time* or 0.2 to 3 sec
Esens: 10-90%
Rise time: Mid/high/max/auto
Peak flow: Adaptive Flow or 1 to 120 L/min
Spontaneous up to 180 L/min
Oxygen mix (FIO
2
): 21 to 100%
PEEP: 0 to 40 cm H
2
O
Trigger sensitivity: 1 to 20 L/min flow sensitivity
–0.5 to –20 cm H
2
O pressure sensitivity
PSV: 0 to 60 cm H
2
O
Positive pressure relief ralve: 80 cm H
2
O
Synchronized nebulizer: 5 to 240 min
Monitoring and Displayed Parameters
• Airway pressure
(analog bar graph & numerical)
• Total breath rate
• I:E ratio
• Exhaled tidal volume
• Exhaled minute volume
• Peak flow
• Inspiratory time
• Electrical power source
(AC/external DC/internal DC)
• Battery level
• Pressure, flow and volume Waveforms
software package:
– Real-time pressure and
flow waveforms
– Waveform history browse
• Trending of monitored data (72 hours)
• Respiratory mechanics (C, R, MAP, RR/Vt)
– Pressure, flow and volume loops
• SPO
2
User Adjustable Alarms
Alarms:
• Inverse I:E ratio
• Low O
2
pressure
• AC disconnect
• Low/Empty battery
• Over temperature
• Service notice
• Patient disconnect
• Check sensor
• High PEEP
• Battery disconnected / damaged
• Sensor disconnect
Indicators:
• Alarm silence icon and timer
• Breath type icon
• Internal battery use
• Date and time
• Hour meter
• Battery charge level
• Need calibration
• LED: On, charge, alarm
• Nebulizer status indicator
Size and Weight
Dimensions:
Height:
13”/33 cm
Width: 9.5”/24 cm
Depth: 10.3”/26 cm
Screen: 8.4” diagonal
Weight: 18.3 lb/8.3 kg (without battery)
Battery weight: 6.2 lb/2.8 kg
Overall weight with standard battery: 24.5 lb/11.1 kg
Overall weight with optional extended
internal battery:
27.8 lb/12.6 kg
Power Supply
External AC: 100 to 240 V, 50 to 60 Hz, Max 1.6 A
External DC: 12 to 15 V, Max 8.5 A
Internal battery: Sealed lead-acid 12 V (7.8 Ah) (rechargeable)
Operating time: Depending on ventilator settings and impedance –
standard internal up to 2 hours, optional extended internal
up to
4 hours and optional external up to 8 hours.
Oxygen (Enrichment) Supply
High pressure supply: 40 to 75 psi (2.8 to 5.1 bar)
Low pressure: Max 15 L/min or 0.5 psi
External Interface
Environmental Specifications
Operating temperature: 0 to 50° C/32 to 120° F
Storage temperature:
–15 to 70° C/–4 to 140° F
Relative humidity: 15 to 95% at 30° C/85° F
Water/dust resistance: IP54 (splash proof)
Atmospheric pressure: 430 to 825 mm Hg (15,000 feet)
Vibration:
IEC 68-2-6 and IEC 68-2-34
MIL-STD-810E
Shock: IEC 68-2-27 (100 g)
MIL-STD-810E
Total external sound level: 40 to 45 dBa at one meter
Standards and Safety Requirements
• Electrically powered,
computer controlled ventilator
• Closed loop flow & pressure controller
• Ventilation modes:
– Assist control (A/C):
– Volume controlled
– Pressure controlled
– Synchronized intermittent
mandatory ventilation (SIMV):
– Volume controlled
– Pressure controlled
– Continuous positive airway pressure
(CPAP)
– Pressure support ventilation (PSV)
• Special features:
– Adaptive Bi-Level* (NIV)
– Adaptive Flow*
– Adaptive I-Time*
– Preset parameters by patient weight
– Apnea backup ventilation
– Adjustable rise time
– Easy Exhale
– Sigh breath
– 100% O
2
suction
• Respiratory rate (high/low)
• Minute volume (high/low)
• Pressure (high/low)
• Low Vt (15 to 85%)
• SPO
2
(high/low)
• HR (high/low)
• Apnea time (0 to 120 seconds)
• FIO
2
(high/low)
• Leak (0 to 100%)
• Remote monitor (VGA)
• RS-232 serial port, 9 pin • DIN keyboard connector
• RJ11 remote alarm connector
Meets the requirements of:
• ASTM F1246-91
• CSA C22.2 No. 601.1/601.2
• UL 60601.1
• EN/IEC 60601-1
• EN/IEC 60601-1-2 • EN/IEC 60601-2-12
• EN 794-3
• ISO 10651-2/3
• EN/IEC 60601-1-6
• EN/IEC 60601-1-8