GE Healthcare TruSignal adhesive SpO2 sensors - Manual

TruSignal SpO
2
Adult Adhesive Wrap sensor
(TS-AAW-10, TS-AAW-25)
TruSignal Adult Adhesive Wrap sensors are designed with
a highly flexible sensor body for ease of application to the
measurement site and a high degree of patient comfort.
Suitable for patients 20 kg (44 lb.) and above, they are
applied to a finger or toe. The adhesive is strong enough
to hold the sensor in place yet gentle enough not to hurt
the skin.
TruSignal adhesive
SpO
2
sensors
Connecting intelligence and care.
Excellent performance in single-patient-use oximetry sensors
TruSignal* adhesive single-patient-use SpO
2
sensors provide the
clinical performance you expect in settings that require elevated
infection control – such as the burn unit, trauma unit, emergency
department, intensive care unit, isolation room and operating room.
Designed for use in continuous non-invasive arterial oxygen saturation
(SpO
2
) and pulse rate monitoring, the sensors hold securely in place
despite patient motion, delivering accurate readings that help clinicians
make appropriate and confident care decisions.
GE Healthcare offers four varieties of adhesive sensors, designed with
patient comfort in mind. All are backward compatible with Datex,
Ohmeda and GE SpO
2
technologies. Sensors of all types are individually
calibrated to ensure the best achievable accuracy. The sensors are
drip-proof and able to withstand cleaning with 60% isopropyl or 90%
ethyl alcohol if needed.
The sensor materials do not contain natural latex rubber or known
environmental contaminants. All four sensor models comply with:
• ISO 9919:2009 – Pulse oximeters for medical use – Requirements
• ISO 10993-1:2009 – Biological evaluation of medical devices
Sensors are designed to last two to three days with the same patient;
sensor adhesiveness withstands re-attachment every four hours.