GE Healthcare enFlow IV Fluid and Blood Warmer - Brochure - Manual (Page 3)

Patient dedicated
cartridge requires less
than 4 mL priming volume
and is placed in-line like
other IV components using
standard priming and
aseptic techniques.
Preventing hypothermia is important throughout the
entire perioperative experience, starting in the pre-
operative period. An ounce of prevention is worth a
pound of cure.
Providing care through all phases of the perioperative
experience with other warming devices can be difficult
and expensive. They may require either using multiple
disposables or compromising your infection control
protocols to accomplish what the enFlow system does
with just a single cartridge.
Start in the pre-operative area
One cartridge for three areas is cost-effective
Closer means warmer
The small and unobtrusive disposable cartridge can connect into your current
IV set. Your patients can be pre-warmed before entering the operating room.
The cartridge can then move with the patient to the operating room where
it may be placed into another warmer. It can also go with the patient when
moved to the PACU and again fluid warming can continue.
The innovative design of the enFlow warmer enables it to
be placed within inches of the IV site. The close proximity
of warmer reduces the potential for fluid cooling within
the IV line.
The keyed design of the cartridge and warmer facilitates
consistent and correct placement