GE Healthcare MaxiStop_S HEPA Filter - Manual (Page 2)

GE Healthcare
P.O. Box 900, FIN-00031 GE, Finland
Tel. +358 10 394 11
Fax +358 9 146 3310
www.gehealthcare.com
© 2010 General Electric Company – All rights reserved.
GE, GE Monogram, and MaxiStop are trademarks at
General Electric Company.
GE Healthcare Finland Oy, a General Electric company,
doing business as GE Healthcare.
EMEA M1072427-1/1010
Global version DOC0837915 09/2010
GE Healthcare provides single-source
simplicity
Purchasing accessories and supplies from a single source
means fewer purchase orders to process, less vendors to
research, and fewer contracts to review. It also translates
to cost savings through customized supply contracts, like
continuing supply agreements and deferred purchase
agreements. And when your single source is GE Healthcare,
you have the benefit of a dedicated sales and support
organization, as well as global resource and distribution
network. Make the right connection with accessories and
supplies from GE Healthcare.
Warning
Never connect a nebulizer upstream of the filter. This device
has dead space, which should be taken into consideration
when calculating tidal volume and patient ventilation
requirements. The recommended frequency for changing
filter is at least every 24 hours or earlier if increased
resistance is noted.
Caution
Replace filter immediately, if there is any suspicion of
contamination, occlusion, or other indications of malfunction
present.
Instructions for Use
For detailed information on use of product, always refer to
the instructions for use accompanying the device.
Ordering Information
M1043237 MaxiStop/S HEPA filter, 50/pkg
Filtration efficiency1
Bacterial (%) >99.9999
Viral (%) >99.9999
Pressure drop dry
(kPa/cm H2O)
30 1/min 0.18/1.8
60 1/min 0.38/3.8
Dead space (ml) 54
Weight (g) 40
Connectors
Patient side (mm) 15F/22M
Machine side (mm) 15M/22F
Sampling port Female Luer lock
MaxiStop/S HEPA
1 Measured by the method of Nelson Laboratories Inc. USA Records on file.