EVS XTAccess Version 1.15 - January 2011 User Manual - Manual (Page 9)

Issue 1.15.B XTAccess Version 1.15 – User’s Manual
Author: Serge Comes - EVS Broadcast Equipment – January 2011
2. Hardware
Recommendations
The XTAccess software is installed on a workstation operating under Windows XP,
Windows 2003 Server, windows Seven 32 bit, windows Seven 64 bit or Windows
Server 2008 SP2 64 bit. With the 64 bit OS, XTAccess runs as a 32 bit application.
The minimum system requirements are:
• Workstation or Laptop
• CPU Pentium P4, 2.0 Ghz +
• 512 MB RAM (2GB for the rendering of playlist and transcoding jobs)
• GigE board with Jumbo Frame capabilities
• VGA 1024x768
The XTAccess software runs either on EVS workstations like IPDirector, XFile,
XStore, or on any standalone third-party workstation.
Important
Jobs like transcoding, backup of clips or trains, restore/copy of files to
EVS Server use CPU resources on the device where XTAccess runs. It is
then advised not to run any other critical application simultaneously on
the XTAccess device, especially when the Xedio Suite or IPDirector are
installed as standalone systems with a local database.
8