EVS XTAccess Version 1.18 - July 2012 User Manual - Manual (Page 34)

Issue 1.18.A XTAccess Version 1.18 – User Manual
EVS Broadcast Equipment – July 2012
24
Audio Channels Map
This setting is used to define how the output audio channels will be distributed to the
generated audio files:
• Use <;> to separate the content of the various audio files to generate
• Use a space between each audio channel to be included in an audio file
• Use <-1> to mute a channel (not for the Wav backup)
• Audio channel are between 0 and 7
Example: 0 1 3 4; 7 2; 4 5; 3 6 will create 4 BWAV files
Destination file’s native TimeCode
This setting allows you to define which timecode will be saved in the video file
• Primary TC : Saves the XT Primary TC in the video file
• LTC : Saves the LTC in the video file
• User TC: Saves the User TC in the video file
Default File Transcoding Profile
Default Transcoding profile is used for the job to file (if you have selected the 3 rd option
“Transcode the source media using …”) or for the Rendering of playlist
In this field, you have to define an XML profile file that defines the codec and parameter
of the codec used to transcode the file.
You can find some encoder profiles into the “C:\Program Files\EVS Broadcast
Equipment\XTAccess\Encoder Profiles 2.0” folder
To XT Server
Transcode Restored File
Select this option if you want to transcode the file during the restore operation.
Remove Source file if restore successful
In case of Restore and Copy, it could be useful to automatically delete the source file to
clean the source storage. The file will be removed only if the job is successful.
Default File Transcoding Profile
Default Transcoding profile used for the
job to XT (if you have selected the 3 rd option
“Transcode the source media using …”) or for the Rendering of playlist.
In this field, you have to define an XML profile file that defines the codec and parameter
of the codec used to transcode the file.
You can find some encoder profiles in the “C:\Program Files\EVS Broadcast
Equipment\XTAccess\Encoder Profiles” folder
Enable Multi-Dests
If the multi-destination is activated in the XML Scan Folder, XTAccess will use the multi-
dest template and not anymore the XML job or the XTAccess interface to define the
different destination paths.