Concord WANDERER INSTRUCTION MANUAL User Manual
Page 10
35
34
_ ADJUSTING THE SEAT ANGLE
_ USING THE SAFETY BAR
The CONCORD WANDERER’s safety
bar (
05
) is pushed into its matching
socket on the seat unit (
04
) and then
locked into place.
The safety bar can be removed when
putting your child in and when taking
him/her out. To do so, press the
release buttons (
07
) located to the left
and right on the inside of the seat unit
and pull the safety bar up to remove it.
_ ADJUSTING THE HANDLEBAR
The handlebar (
02
) can be set to an individual position that is comfortable
for you. To do so, press the release buttons (
03
) to the left and right of the
handlebar (
02
) and move the handlebar into the position you want (so that it
locks into place).
_ ADJUSTING THE FOOTREST
The footrest (
09
) can be locked into a range of different positions. To do so,
press the adjustment knobs (
08
) to the left and right of the seat unit and
move the footrest (
09
) into the position you want (so that it locks into place).
The tilt angle of the backrest can be adjusted steplessly with the help of the
adjustment straps (
16
) on the back of the CONCORD WANDERER.
Pull the upper
adjustment strap (
16
) to
tilt the backrest up.
Pull the lower adjustment
strap (
16
) to tilt the
backrest down.