Blue Ox BX4335 User Manual

Page 8

Automatic Equipment Mfg. Co.

One Mill Road, Industrial Park

Pender, Nebraska 68047

292-2098 4/98

Mfg. Co. Pender, NE 68047

QUICK REFERENCE GUIDE

HOOKING UP & EXTENDING FOR TOWING

1. Align vehicles in towing position with straight driveway

ahead and parking brakes locked.

2. Slide driver side pivot arm across over safety stop.

Place ball coupler on 2 inch ball.

3. Drive towing vehicle forward until both legs are locked.

(Locking Levers Up)

4. Install safety cables and towed vehicle lighting.
5. Detailed instructions appear on pages 3-4.

UNHOOKING & FOLDING FOR STORAGE

1. Park vehicles in a straight line on level surface. Apply

towing vehicle parking brake. Place towed vehicle in

park or 1st gear for manual transmissions.

2. Remove safety cables and towed vehicle lighting.
3. Disengage leg latches. Slide driver side pivot arm

towards passenger side. Place coupler ring on

storage post and pin in place.

4. Detailed instructions appear on page 4.

Product Safety Policy Statement

It is, and shall continue to be, a primary objective of Automatic Equipment Manufacturing

Company to provide customers with safe and reliable products. Automatic will, and has, estab-

lished safety procedures in product design, manufacture, promotion and sales; and will coordinate

efforts to promote customer safety to the greatest extent possible. Each department has primary

responsibility for the promotion of safety under the guidelines of the Product Safety Committee.

Repair parts may be ordered through your nearest

Automatic dealer or distributor.

TO BE VALID, THE WARRANTY CARD MUST BE

COMPLETED IN ITS ENTIRETY BY AN AUTHORIZED

DISTRIBUTOR OR DEALER AND SENT TO AUTOMATIC

EQUIPMENT MFG. CO., PENDER, NEBRASKA. FAILURE

TO DO SO WILL VOID THE WARRANTY.

WARNING: Insure that your towing vehicle is of adequate size to properly control

your towed vehicle. The weight and braking capacity should be large enough to handle

both vehicles in an emergency situation. Check your towing vehicle manufacturers

recommendations for towing, hitch load, and braking capacities.