Blue Ox Sport Carrier Product Brochure - Manual (Page 10)

NOTE: Please verify motorhome chassis capacity rating before purchase, as some coaches do not support all carriers or SportLifts. SportLifts are for
Diesel Pushers only. Some welding is necessary for installation of SportLifts, SportCarriers, and Motorcycle Carrier I. Follow proper welding guidelines.
Easy to assemble and remove. Motorcycles are
simple to load and unload. An adjustable width rail
and tire stop makes it easy to change configurations for
different sized motorcycles. The black powder coated steel
carrier does not interfere with vehicle towing. Tie down
brackets and loading ramp included.
• Motorhome and bus mount
• Easy to install and remove
• Loading ramp stores on unit
• Adjustable tire stop
• Black powder coat steel finish
• 1,000 lb. capacity
• Requires 3 attachment points (utilizes existing
receiver, 2 additional 1-1/4” receivers are included
to be welded on)
• Flat tow up to 5,000 lbs. (no trailers)
Mounts in receiver of pickup or SUV and is
designed to eliminate unwanted rocking.
Loading ramp (included) attaches to carrier when not
in use. Can be mounted to load from either side. Easy
assembly, easy storage. Black powder coat finish. 600 lb.
limit. (The capacity of the carrier is limited to the tongue
capacity of the receiver hitch.)
• Mounts in receiver of pickup or SUV
• Uses existing receiver
• Easy assembly/storage
• Loading ramp stores on unit
Motorcycle Carrier
™
I
Motorcycle Carrier
™
II
SC2001, Motorcycle Carrier ™ II
Ramp storage.
SC2000, Motorcycle Carrier I