Blue Ox SC9009 - Manual

cycle rack
pin
channel
®
®
Ramp Bracket Kit
SC9009
Installation Instructions
Installation for Ramp Bracket Kit SC9009
The SC9009 Ramp Bracket kit is designed for use with Blue Ox® SportCarrier I™ (SC2100) and II™
(SC2101). The SportCarrier must be assembled and installed per its instructions before the ramp
bracket kit installation can begin.
Contents:
Ref # Qty. Part # Description
1 2 61-6118 Weldment, Bracket, Ramp
2 2 61-5636 Weldment, Pin Cycle Rack
3 2 62-3458 Assy, Hair Pin Clip, Cycle Rack
4 2 201-0278 3/8-16 x 3/4” Sq Hd Cap Krnl
4 290-0446 Cover, Protective, Plastic (not shown)
WARNING:
USE ONLY GENUINE FACTORY REPLACEMENT PARTS.
Do NOT substitute homemade or non-typical parts. This may cause
your ramp brackets to fail and result in injury or death. If repairs of
parts or components of your ramp brackets are needed, you may
order them through your nearest Blue Ox ® dealer or distributor, or call
our 24/7 Customer Care Team at (402) 385-3051 or toll free at (888)
425-5382.
Installation Instructions
1. Slide ramp brackets into the channels on the
rear of the deck.
2. Insert the 3/8-16 x 3/4” square head cap knurl
set screw into the channel. Using the 12”
crescent wrench, securely tighten the screw. Do
this to both ramp brackets.
Tools Required
12” Crescent Wrench
Date 04/06 292-2827 1 of 2
4
2
1
3