Blue Ox BX8811 - Manual (Page 3)

292-0808 10/99 3 of 4
DIAGRAM FOR TYPE A VEHICLES
(Vehicles with standard red turn signals)
DIAGRAM FOR TYPE B VEHICLES
(Vehicles with separate amber turn signals)
(Brake light wire splits before the lights)
DIAGRAM FOR TYPE C VEHICLES
(Vehicles with separate amber turn signals)
(Power for one brake light comes from other
lights socket)
Cut the main brake wire coming from the front, and
strip it back approximately 1/4". Use the butt connector
provided to connect the stripped wire and the single wire
on the splitter, crimp with a wire terminal crimper. Attach
the two ends of the splitter to the left and right screws on
the front of the connector.
Attach the brake wire going to the back brake lights to
the appropriate terminal, depending on whether the wire
goes to the left or the right brake light first.
Cut the wire connecting the first brake light to the
second brake light. Connect the wire that goes to the
second brake light to the appropriate terminal, which will
correspond with the side the second light is on.