Blue Ox BX88271 User Manual

Page 2

BX88271

ATM Mini Fuse ByPass Switch

Installation Instructions

405-0977

Page 2 of 2

12/6/12

9. Install the “towed’s” removed fuse into the fuse holder in the Fuse ByPass harness.

Note: For Honda vehicles you will need to buy an ATM fuse of the same rating (color) as the

original equipment fuse. Insure that the fuse pins are directly placed into the holder’s terminals.

When the Fuse ByPass Button is depressed in the direction of the white dot (on single circuit

versions) the fuse is “ON”. This is the “driving the towed” position. When the button is pressed in

the opposite direction, the fuse is “OFF” and this is the position for “Towing”. Confirm that the switch

operation is as described.

Troubleshooting - Fuse ByPass fails to operate

• Insure that the pins are fully seated in the correct position in the Fuse Panel and not touching

each other

• Make sure that the wiring is properly connected to the back of the switch

• Insure that there is a fuse (and it is not blown) in the Fuse ByPass harness and that the fuse is

properly installed in the fuse holder in the harness

NOTICE: Installation of the Fuse ByPass Switch is strictly at the user’s risk. Blue Ox® assumes no

liability for any damage or any liability in any way for the proper or improper use or installation of this

product. The Buyer acknowledges that the Fuse ByPass is supplied as a convenience item to the

RVer, who accepts full responsibility for any damages and all liability for any claims including any

warranty claims that may be considered voided by the manufacturer.

CUSTOMER SERVICE COMMITMENT

Blue Ox® is committed to providing you with exceptional customer care throughout your lifetime with our

products. Our team is here to assist you with any questions you may have regarding the performance of your

product. Simply call (402) 385-3051 and you can speak with our customer care team.

Additionally, please visit our website to see which rallies our Destination America team will be attending. For a

nominal fee, our service technician will service your towing system to ensure it’s in proper working condition.

Also, as a commitment to our customers, should you visit our factory, you can stay at our full service Blue Ox®

campground at no charge along with enjoying a factory tour.

Again, thank you for being our customer and for the confidence you have shown in the performance of our

products. It is because of customers like you we enjoy the success we have today.

One Mill Road, Industrial Park

Pender, Nebraska 68047

Phone: (402) 385-3051

Fax: (402) 385-3360