Blue Ox BX88273 User Manual

Page 2

BX88273

2 ATM Fuse ByPass Switch

Installation Instructions

405-0240 Rev A

Page 2 of 2

7/30/13

8. Tape the wiring if there is any exposed metal in the immediate area of the switch.
9. Install the “towed’s” removed fuse into the fuse holder in the Fuse ByPass harness.

Note: For Honda vehicles you will need to buy a fuse of the same rating (color) as the original

equipment fuse. Insure that the fuse pins are directly placed into the holder’s terminals.

Troubleshooting - Fuse ByPass fails to operate

• Insure that the pins are fully seated in the correct position in the Fuse Panel and not touching

each other

• Make sure that the wiring is properly connected to the back of the switch

• Insure that there is a fuse (and it is not blown) in the Fuse ByPass harness and that the fuse is

properly installed in the fuse holder in the harness

• If a dead battery situation is occurring, contact your vehicle’s manufacturer to see what circuits

are live when the key is in the towing position.

NOTICE: Installation of the Fuse ByPass Switch is strictly at the user’s risk. Blue Ox® assumes no

liability for any damage or any liability in any way for the proper or improper use or installation of this

product. The Buyer acknowledges that the Fuse ByPass is supplied as a convenience item to the

RVer, who accepts full responsibility for any damages and all liability for any claims including any

warranty claims that may be considered voided by the manufacturer.

CUSTOMER SERVICE COMMITMENT

Blue Ox® is committed to providing you with exceptional customer care throughout your lifetime

with our products. Our team is here to assist you with any questions you may have regarding the

performance of your product. Simply call (402) 385-3051 and you can speak with our customer care

team.

Additionally, please visit our website to see which rallies our Destination America team will be

attending. For a nominal fee, our service technician will service your towing system to ensure it’s in

proper working condition. Also, as a commitment to our customers, should you visit our factory, you

can stay at our full service Blue Ox® campground at no charge along with enjoying a factory tour.

Again, thank you for being our customer and for the confidence you have shown in the performance

of our products. It is because of customers like you we enjoy the success we have today.

One Mill Road, Industrial Park

Pender, Nebraska 68047

Phone: (402) 385-3051

Fax: (402) 385-3360