Blue Ox TC35270 - Manual (Page 7)

Tools Required
9/16” Socket 3/8” Drive Ratchet 1 1/8” Socket 1 1/8” Wrench
3
5
1
4
FRONT OF VEHICLE
2
NOTE:
Chassis and bracket installation shown may
vary slightly from your individual installation.
TruCenter TM unit orientation shown may be rotated
180 degrees from your individual installation. Refer
to the bracket kit instructions included with your
application.
Parts List
Ref. No. Qty. Part No. Description
1 1 TC35160 TruCenter TM Steering Control
or TC35270 TruCenter TM Steering Control
2 1 62-3631 Weather Tight Cord
3 2 201-0847 3/4”-10 x 3-1/2” Hex Bolt, Grd. 5
4 8 203-0007 3/4” Flat Washer, ZP (Required)
5 2 202-0074 3/4”-10 Flange Whiz Lock Nut
IMPORTANT:
Use only genuine factory replacement parts on your bracket kit. Do not substitute homemade
or non-typical parts. If a bolt is lost or in need of replacement, for your safety and the preserva-
tion of your bracket kit, be sure to use a replacement bolt of the same grade. Repair parts may
be ordered through your nearest Blue Ox dealer or distributor.
Page 7 of 7 292-6090 Rev. K 5/30/12