American Magnetics Current Leads for Cryogenic Systems Manual - Manual (Page 10)

Rev. 5, July 2003 Page 10 of 10
VII. TROUBLESHOOTING
If you have any questions, please contact an Authorized AMI Technical Support Representative
at (865) 482-1056, or by email: [email protected]
VIII.
WARRANTY
All products manufactured by AMI are warranted to be free of defects in materials and
workmanship and to perform as specified for a period of one year from date of shipment. In the
event of failure occurring during normal use, AMI, at its option, will repair or replace all
products or components that fail under warranty, and such repair or replacement shall constitute a
fulfillment of all AMI liabilities with respect to its products. Since, however, AMI does not have
control over the installation conditions or the use to which its products are put, no warranty can
be made of fitness for a particular purpose, and AMI cannot be liable for special or consequential
damages. All repairs are F.O.B. Oak Ridge, Tennessee, USA. If the repairs are covered under this
warranty then standard shipping for return to the customer is paid for by AMI within the USA.
IX. PRODUCT LIABILITY DISCLAIMER
Due to the fact that AMI does not have control over the installation conditions or use of its
products, no warranty can be made of fitness for a particular purpose. AMI cannot be liable for
special or consequential damages that may occur for these reasons.
X.
RETURN AUTHORIZATION
Items to be returned to AMI for repair (warranty or otherwise) require a Return Authorization
number to ensure your order will receive the proper attention. Please call an AMI representative
at (865) 482-1056 for a Return Authorization number prior to shipping any item back to AMI.