POPCORN HOUR C-300 - Manual (Page 10)

9
www.popcornhour.com
100~240 V, 50~60 Hz, max 2.5A
UL C US LISTED OPTICAL
COAX
S/PDIF S-VIDEO ETHERNET USB 2.0 COMPONENT VIDEO POWER
AUDIO OUT CVBS
R L
Y
LNK ACT
Pb Pr
Networked Media Tank
Model No.: C-200
Input : 100~240 V, 50~60 Hz, max 2.5A
Typical Power : 13W
Maximum Power : 70W
Designed and developed by Syabas Technology in US and Malaysia.
Made in China
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Only replace fuse with same rating
ON
OFF
RoHS
TV Back Panel Connectors
ANT IN
COMPOSITE IN
L R
100~240 V, 50~60 Hz, max 2.5A
UL C US LISTED OPTICAL
COAX
S/PDIF S-VIDEO ETHERNET USB 2.0 COMPONENT VIDEO POWER
AUDIO OUT CVBS
R L
Y
LNK ACT
Pb Pr
Networked Media Tank
Model No.: C-200
Input : 100~240 V, 50~60 Hz, max 2.5A
Typical Power : 13W
Maximum Power : 70W
Designed and developed by Syabas Technology in US and Malaysia.
Made in China
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Only replace fuse with same rating
ON
OFF
RoHS
5.4 Connecting to component TV
What you need:
o Popcorn Hour C-300
o Power Supply
o Component Cables (not inlcuded)
o TV with Component Terminal
Step 1
Connect the component cables to both the component terminals on the C-300 and your TV by match-
ing the green, blue and red video plugs and the red and white audio plugs to their coordinating termi-
nals.
Tips: If your component cables only include the green, blue and red plugs you will need to use a set of composite cables to con-
nect to the TV for audio. If doing so, you do not need to connect the yellow plug.
Step 2
Connect the AC power cord to AC power adapter. Then plug the power cord into your wall socket and
connect the power lead to Popcorn Hour C-300. Your Popcorn Hour C-300 is booting up now, check
your TV for further instructions.