GLOBALSAT TR-151SP - Manual (Page 25)

TR151-SP page 25
5.2 Write Configuration
5.2.1 How to configure TR151-SP by SMS?
You can send SMS to configure following parameters into TR151-SP. There are 9 settings as
below.
z SMS Default Report Phone Number
z Maximum GPS Fixing Time
z Default Report Mode Setting
z SOS Numbers
z Motion setting
z GPRS setting
z Normal Setting
z On-line setting
z Cell ID setting
Report type Format Return message
SMS Default
Report Phone
Number ?7,IMEI,1,Enable SMS Default Report Phone Number,
SMS Default Report Phone Number, Return Phone Number! ?7,IMEI,OK!
Maximum GPS
Fixing Time
?7,IMEI,2,Maximum_GPS_Fixing_Time,Return Phone Number!
?7,IMEI,OK!
Default Report
Mode Setting ?7,IMEI,3,Default_Report_Mode,Report_Interval,Number_of_Reports,R
eport_Format,Return_Phone_number_For_Default_Report_Mode,Retur
n_Phone_Number! ?7,IMEI,OK!
SOS Numbers ?7,IMEI,4,SOS1,SOS2,SOS3,Return_Phone_Number! ?7,IMEI,OK!
Motion Setting ?7,IMEI,5,Regular_Report_interval,Motion_report_Interval,Sensitivity,Mo
tion_Return_Number,Return_Phone_Number! ?7,IMEI,OK!
GPRS Setting ?7,IMEI,7,Port,APN,User_Name,User_pwd,DNS1,DNS2,Host_Name,R
eturn_Phone_Number! ?7,IMEI,OK!
Normal setting ?7,IMEI,8,Name,Time_Zone,Report_method of SOS and battery
low,Echo_EN,Return_Phone_Number! ?7,IMEI,OK!
On-line setting ?7,IMEI,B,Enable/disable_GPRS_on-line,disconnect and re-connect
interval, Return_Phone_Number! ?7,IMEI,OK!
Cell ID ?7,IMEI,C,Enable/disable_Cell_ID,Return_Phone_Number! ?7,IMEI,OK!
Note:
If you don’t need the TR151-SP to send back the confirmation message after the TR151-SP receives the
configuration SMS, you do not have to set the “Return phone number”. Please end the configuration SMS with a “!”
instead of the “,Return phone number” without the comma.
Example 1 - Set the cell ID without return phone number: ?7,IMEI,C,Enable/disable_Cell_ID!
Example 2 - Configure GPRS settings without return phone number:
?7,IMEI,7,Port,APN,User_Name,User_pwd,DNS1,DNS2,Host_Name!