GLOBALSAT TR-151SP - Manual (Page 20)

TR151-SP page 20
4.5 How to set TR151-SP enter motion mode?
You could send command to ask TR151-SP to enter motion mode by SMS command media or
GPRS command media. Under motion mode, in addition to the static report interval, TR151-SP
will send out the motion report when it senses vibration. If you’d like to continually get the
location information of the vehicle installed with TR151-SP, you could make TR151-SP enter
motion mode.
SMS Command Media for Motion Mode
?16,IMEI,Report_media,Regular_Report_Interval,Vibration_Report_interval,
Sensitivity,Motion_Return_Phone_number,Report_phone_number!
GPRS Command Media for Motion Mode
$16,IMEI,Report_media,Regular_Report_Interval,Vibration_Report_interval,
Sensitivity,Motion_Return_Phone_number,Report_phone_number!
Format Description
?,$ Start sign
16 Function code
IMEI IMEI code of the TR151-SP
Report Media
The method of sending the location information
1: SMS
2: GPRS
3: SMS & GPRS
Static Report Interval
The regular report interval of motion mode. The unit is minute. The
range is 30-1440 minute.
Motion Report Interval
The report interval when TR151-SP senses vibration. The unit is
second. The range is 5-65535 second.
Sensitivity
The number of vibration which activates TR151-SP to send motion
report. The value range is 1~255. The larger the number is, the less
sensitive the device is.
Motion_Report_Phone_Number The phone number for receiving location report
Return_Phone_Number The phone number for receiving OK message.
! End sign
TR151-SP will send OK message to the return phone number when the command media is SMS
or to GPRS server when the command media is GPRS to confirm it has received the request.
If the report method is SMS:
According to the static report interval, TR151-SP will send the static report like