Removing a hard drive – Dell Dimension 5150__E510 User Manual

Page 36

Check the documentation for the drive to verify that it is configured for your computer.

Removing a Hard Drive

1. Follow the procedures in "

2. Remove the computer cover.

NOTICE:

Use the pull-tab to remove the data cable from your hard drive or from the system board.

3. Disconnect the power and data cables from the drive.

1 serial ATA data cable
2 power cable

4. Press the blue tabs on either side of the hard drive bracket toward each other and slide the drive up and out of the

computer.

1 hard drive
2 tabs (2)