Yamaha PSR-340 - Manual (Page 97)

97
DISK OPERATIONS
UTILITY — DELETE
1
Insert the floppy disk into the disk drive.
2
Press the UTILITY button.
The filename will appear at the top of the display.
To exit from the UTILITY screen, press the UTILITY button twice.
• If the UTILITY button is
pressed when there is no
floppy disk inserted into the
disk drive, a “No Disk”
message appears at the top
of the display, and all disk
operations will be disabled.
• When the floppy disk’s
write-protect tab is set to
ON (see page 92) or the
disk is a purposely “copy-
protected” disk, a “Protect”
message appears, indicating
that the Utility function is
not possible.
3
Select the file to be deleted.
Use the +/- buttons. Only files that were created
on the PSR-340 and were
saved as files (User song,
etc.) can be deleted. When
there are no files on disk
that the PSR-340 can
delete, the FORMAT display
appears instead of DELETE,
when the UTILITY button is
pressed.
4
Press the EXECUTE button.
5
Execute the Delete operation.
Press the + button (“YES”), and the Delete operation will start. Once
started, the operation cannot be canceled.
As the file is deleting, “Deleting” will appear on the top line of the display.
When the operation is completed, the following display briefly appears.
If you do not intend to delete the file, press the - button (“NO”) instead of
the + button (“YES”).
CAUTION
While the file is being
deleted (the DISK IN USE
lamp is lit), never eject the
floppy disk or turn the
power off.
This function allows you to delete individual files of User data you’ve saved
to floppy disk.
USr Filename
YES Filename
USr Filename
USr Deleting
End
95