Dell PowerEdge M600 - Manual (Page 6)

4
HBA LEDs (Excludes the QME2462 HBA)
QLA234x/QLE220 HBA LED Scheme QME2472 HBA LED Scheme*
Troubleshooting and Technical Support
The QLogic knowledge database contains troubleshooting information for the QLogic SANblade HBAs. Access the data
base from the QLogic web site
www.qlogic.com/support/knowledge_base.asp.
For technical support, visit our web site support.qlogic.com, email us at [email protected] , or call at 952-932-4040.
Warranty
The QLogic SANblade HBA comes with a standard three year QLogic warranty, or as specified by other agreements.
Please check the QLogic Web site at www.qlogic.com for warranty details.
Laser Safety (Excludes QME2462 and QME2472)
FDA Notice
This product complies with DHHS Rules 21CFR Chapter I, Subchapter J. This product has been designed and manufactured according to
IEC60825-1 on the safety label of laser product.
Green LED Amber LED Activity Green LED Amber LED Activity
❍ ❍ Power off Flashing ❍ 4 Gbps
● ● Power ❍ Flashing 1 Gbps or 2Gbps
● ❍ Online
❍ ● Link
established
For more information, please refer to your
Server Hardware Owner’s Manual
❍ Flashing Loss of
synchronization
*
LEDs located on Fibre Channel Passthru Module
Alternate
flashing
Alternate
flashing
Firmware error
Flashing ❍ Beacon
QLE246x HBA LED Scheme
Yellow LED Green LED Amber LED Activity
❍ ❍ ❍ Power off
● ● ● Power on (before firmware init)
Flashing Flashing Flashing Power on (after firmware init)
Yellow, Green and Amber LEDs flashing alternately Firmware error
❍ ❍ ●/Flashing Online, 1-Gbps link established
❍ ●/Flashing ❍ Online, 2-Gbps link established
●/Flashing ❍ ❍ Online, 4-Gbps link established
Flashing ❍ Flashing Beacon