System features – Dell PowerEdge SC 440 User Manual
Page 5
Getting Started With Your System
3
System Features
The major hardware and software features of your system include:
•
One of the following processors:
–
Intel
®
Pentium
®
D
processor, E6000 sequence.
–
Intel
Celeron
®
D, 300 sequence.
–
Intel Pentium 4, 600 sequence.
All processors are Intel Extended Memory 64 Technology (Intel EM64T) capable.
NOTE:
Use the System Setup program to view processor information. See the Hardware Owner’s Manual.
•
A minimum of 512 MB of 533- or 667- (when available) MHz DDR II SDRAM memory, upgradable to
a maximum of 4 GB DDR II SDRAM memory by installing 512-MB or 1-GB unbuffered ECC memory
modules in the four memory module sockets on the system board; single or dual rank.
•
Support for the following internal hard-drive (non–hot-plug) configurations:
–
Up to two internal 3.5-inch SATA hard drives with an integrated SATA controller
or
–
Up to two internal 3.5-inch Serial-Attached SCSI (SAS) hard drives with a SAS controller card
•
One 3.5-inch peripheral drive bay for the optional diskette drive, and two 5.25-inch bays for the
following supported drives: CD, DVD, combination CD-RW/DVD, or tape backup device.
NOTE:
DVD devices are data only.
•
Support for the following disk volume types: simple, spanned, stripped (RAID 0), and mirrored
(RAID 1).
•
Support for USB 2.0.
•
A chassis intrusion alert.
The system board includes the following integrated features:
•
Dual-channel IDE controller that supports up to two supported devices including IDE CD, DVD,
CDRW/DVD combination drive, and an IDE tape backup device.
NOTE:
DVD devices are data only.
•
SATA controller that supports up to two cabled SATA hard drives.
•
Two 32-bit, 33-MHz I/O expansion card slots, one x1 lane-width PCIe expansion slot, one x4 lane-
width PCIe expansion slot, and one x8 lane-width PCIe expansion slot.
•
An integrated VGA-compatible video subsystem with an ATI ES1000, 33-MHz PCI video controller.
This video subsystem contains 16 MB of graphics memory with support for 2D graphics. Maximum
resolution is 1600x1200 with 65,536 colors; true-color graphics are supported in the following
resolutions: 640 x 480, 800 x 600, 1024 x 768, and 1280 x 1024.
NOTE:
Your system supports integrated video only.