Bosch Keo - Manual (Page 12)

12 | English
F 016 L70 773 | (23.1.12) Bosch Power Tools
Intended Use
This power tool is intended for domestic use.
It is for cutting branches and can also be used for the sawing
of wood, soft metal such as copper and plaster board.
It is suitable for straight and curved cuts.
The saw blade recommendations must be observed.
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardization documents: EN 60745
(battery powered products) and EN 60335 (battery charg-
ers) according to the provisions of the directives
2011/65/EU, 2006/95/EC, 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS,
Stowmarket, Suffolk IP14 1EY, England
09
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
22.08.2011
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 72 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Cutting board: a
h
=19 m/s 2 , K=6.0 m/s 2 ,
Cutting wooden beam: a
h
=20 m/s 2 , K=3.0 m/s 2 .
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The technical specifications of the power tool deviate from
the test criteria laid out in the standardised test given in
EN 60745.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Reaction direction
Movement direction
Switching On
Permitted action
Prohibited action
Accessories
Sabre saw Keo
Article number 3 600 H61 9..
Rated voltage V= 10.8
Stroke rate at no load n
0
min -1 0 – 1600
Tool holder SDS
Stroke mm 20
Cutting capacity, max. diameter
– in wood
– in soft metal
mm
mm
80
7
Weight according to
EPTA-Procedure 01/2003 kg 1.05
Battery Charger
Article number
EU
UK
AU
2 609 003 916
2 609 003 932
2 609 004 762
Input voltage V 100 – 240
Charging current mA 500
Charging period (battery dis-
charged) min 180
Allowable charging temperature
range °C 0– 45
Weight according to
EPTA-Procedure 01/2003
kg
kg
kg
0.088 (EU)
0.093 (UK)
0.085 (AU)
Protection class / II
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
Symbol Meaning
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
OBJ_BUCH-1453-003.book Page 12 Monday, January 23, 2012 11:09 AM