Mowing – Bosch Indego User Manual
Page 29
English | 29
Bosch Power Tools
F 016 L70 825 | (23.11.12)
Example:
Select a “CUSTOM” schedule with the up/down cursors, e. g.
“CUSTOM 1” and press “Edit”.
Select the mowing day with the up/down cursors, e. g. “Mon-
day” and press “Edit”.
Set up a time slot for “Start” and “End” of automatic mowing.
If a dormant period is required, e. g. at noon, two slots must
be established. For each day a single slot or both slots can be
turned ON or OFF.
The machine will work within a slot unless the battery needs
charging. If the lawn area has been completed before the end
of a time slot the machine will return to the docking station.
Select slot 1 with the right/left cursors and select “On” or
“Off” with the up/down cursors. Select “Start” with the
right/left cursors and adjust a start time with the up/down
cursors. Select “End” and adjust an end time in the same way.
If required set also a start and end time for slot 2. Press
“Save” to confirm your entry.
If the machine should not operate, e. g. on Monday, select
“Off” with the up/down cursors for both slots.
The programmed slot is shown on a schedule.
Set up all additionally required mowing days and confirm your
personal “CUSTOM 1” mowing schedule with “OK”.
A tick
will appear next to the saved mode.
The machine will start mowing as soon as day and start time of
slot 1 is reached.
Note: Set up different schedules for seasonal growing condi-
tions in spring, summer and autumn. Observe the growth of
the grass and adjust your schedule if required.
Note: The Indego’s cutting system is designed to cut small
lengths of grass (3–5 mm) so that the clippings can mulch
down and fertilise the lawn.
Mowing
Do not let children ride the machine.
Press manual stop button before lifting. Always lift the
machine at its handle.
For best mowing results, set up a frequent mowing schedule
for longer lasting battery and for preventing debris on the
lawn.
Once mowing has started:
– in the “MANUAL”, the machine operates until the lawn ar-
ea has been cut or until the manual stop button is pressed
or until the battery needs charging.
– in the programmable “Custom” mode, the machine oper-
ates continuously within a slot. It only pauses mowing for
charging. To stop mowing before the machine has finished
a slot, press the manual stop button. If the lawn area has
been completed before the end of a time slot the machine
will return to the docking station.
The machine has following sensors:
– lift sensor, will be activated if the machine is lifted and
cause the machine and cutting blades to stop
– roll over sensor, will detect when the machine is inverted
and cause the machine and cutting blades to stop
Select Daily Timer
Info
MANUAL
CUSTOM 1
CUSTOM 2
Edit
CUSTOM 3
CUSTOM 4
CUSTOM 5
Back
Select
CUSTOM 1
View
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Edit
Back
OK
CUSTOM 1 – Monday
Slot 1:
On
Start
End
12 : 00
14 : 00
Slot 2:
Off
Start
End
:
:
Cancel
Save
CUSTOM 1
View
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Edit
Back
OK
Select Daily Timer
Info
MANUAL
CUSTOM 1
CUSTOM 2
Edit
CUSTOM 3
CUSTOM 4
CUSTOM 5
Back
Select
OBJ_BUCH-1573-003.book Page 29 Friday, November 23, 2012 9:10 AM