Getting started – Garmin GPSMAP 130 User Manual

Page 18

Using the Map Cursor

Working from the map page is a simple process that centers around the use of the

cursor. Controlled by the R keypad, the cursor is an important tool that can be
used to pan to other map locations, mark and edit waypoints and routes, and review
position data of on-screen navaids and waypoints.

To get a feel for using the map page and using the cursor, try the following exer-

cise:

1. Use the DOWN arrow of the

key to set the map scale to the 64 nm setting. Your boat

should be near the center of the map, at the receiver’s last known position (if your boat
isn’t where it should be, make sure that you have initialized the receiver and acquired a
position as described on pages 1-2).

2. Use the DOWN arrow of the

keypad to move the cursor down to the first lat/lon grid

south of your boat’s position.

3. Using the

keypad to move the cursor, try following the outline of the lat/lon grid closest

to your boat. Notice how another data field appears at the top of the page, showing the
bearing and distance from your boat to the cursor, along with the lat/lon of the cursor.

4. Press the

key to remove the cursor and recenter your boat on the map display.

As you become more familiar with the cursor, you’ll see that the map display

actively scrolls or ‘pans’, letting you explore areas around the world (even outside of
your current G-chart

coverage) and create waypoints and routes. Wherever you

move the cursor, you’ll always be just one Q keystroke away from returning the
map to your present position.

Now that you have a feel for how the cursor works, let’s move on and see how the

GPSMAP 130 works on the water. To help you practice using the map page and
other features, we’ve stored a practice route in the receiver’s permanent memory, so
you can see exactly what you’ll experience when you’re navigating with your new
GPS chartplotter.

GETTING STARTED

Using the Map Cursor

A. Whenever the cursor is active, the bearing and

distance of the cursor from your present position
will appear in a pop-up data window.

B. To remove the cursor and recenter your vessel on

the map, press the QUIT key.

gps 130 7/23/98 9:21 AM Page 8