Garmin Rino 655t - Manual (Page 34)

32 Rino 600 Series Owner’s Manual
Customizing Your Device
Position Format Settings
note: Do not change the position
format or the map datum coordinate
system unless you are using a map or
chart that specifies a different position
format.
Select Setup > Position Format.
• Position Format—sets the position
format in which a given location
reading appears.
• Map Datum—sets the coordinate
system on which the map is
structured.
• Map Spheroid—shows the
coordinate system the device is
using. The default coordinate
system is WGS 84.
Heading Settings
You can customize the compass
settings.
Select Setup > Heading.
• Display—sets the type of
directional heading on the compass.
• north Reference—sets the north
reference of the compass.
• Go to Line/Pointer—allows you
to select how the course appears.
◦ Bearing (Small or Large)—the
direction to your destination.
◦ Course (CDI)—your
relationship to a course line
leading to a destination.
• Compass—switches from an
electronic compass to a GPS
compass when you are traveling
at a higher rate of speed for a set
period of time (Auto), or turns the
compass off.