Garmin Rino 655t - Manual (Page 30)

28 Rino 600 Series Owner’s Manual
Customizing Your Device
3. Select a dashboard.
System Settings
Select Setup > System.
• GPS—sets the GPS to normal,
WAAS/eGnoS (Wide Area
Augmentation System/European
Geostationary Navigation Overlay
Service), or Demo Mode (GPS
off). For information about WAAS,
• Language—sets the text language
on the device.
note: Changing the text language
does not change the language of
user-entered data or map data, such
as street names.
• Battery type—allows you to select
the type of battery you are using.
• Interface—sets the format of the
serial interface:
◦ Garmin Spanner—allows
you to use the USB port with
most NMEA 0183-compliant
mapping programs by creating a
virtual serial port.
◦ Garmin Serial—Garmin
proprietary format used to
provide PVT protocol data.
◦ nMeA In/out—provides
standard NMEA 0183 output
and input.
◦ text out—provides simple
ASCII text output of location
and velocity information.
◦ RtCM—Radio Technical
Commission for Maritime
Services allows the device
to accept DGPS Differential
Global Positioning System
information from a device
supplying RTCM data in an
SC-104 format.
• Battery Save—turns the screen