Reference – Garmin GPS 40 User Manual

Page 37

Once a route has been activated, the Active Route

Page will appear, displaying the waypoint sequence
of your route with the estimated time enroute (ETE)
at your present speed and distance to each way-
point. As long as you are navigating an active route,
the Active Route Page will become part of the main
page sequence of the unit.

The Active Route Page will also allow you to

change the ETE field to display desired track (DTK)
or estimated time of arrival (ETA) for each leg. You
can also clear or invert the active route. To display
DTK or ETA for each leg:

1. Highlight the estimated time enroute (ETE) field

and press the

key.

2. Use the

keys to select ‘DTK’ or ‘ETA’

and press the

key.

To invert a route from the Active Route Page:

1. Press the

key once to move the field highlight

to the ‘invert’ field.

2. Press the

key to invert the route.

To clear the active route from the Active Route

Page and stop route navigation:

1. Use the

and

keys to select the ‘clear’ fie l d .

2. Press the

key to clear the active route.

Once a route has been created and stored in the

GPS 40, it can be edited at any time, even if it is the
active route. To edit a route from the Active Route
Page or the route submenu page:

1. Use the

and

keys to select the waypoint

you want to edit and press

An on-screen menu of editing choices will

appear, with options for reviewing, inserting, delet-
ing or changing the waypoint field highlighted. Use
the

and

arrow keys to select among the

editing choices.

Reference

Active

Route Page

40 rev B 8/6/98 1:47 PM Page 31