Changing the navigation settings – Garmin nuvi 680 User Manual
Page 44

6
nüvi 680 Owner’s Manual
c
UStoMizinG
the
nüvi
screen shot—enable Screen Shot mode.
Quickly press and release the
Power
button to take a screen shot. The picture
bitmap file is saved in the
garmin\scrn
folder on the nüvi drive.
notE: When Screenshot is
on
, the
Quick Settings screen does not open
when you tap the
Power
button.
restore—restore the original display
settings.
Changing the Navigation
Settings
On the Menu page, touch >
navigation
.
route Preference—select a preference
for calculating your route. Select
Faster
time
to calculate routes that are faster
to drive but can be longer in distance.
Select
shorter Distance
to calculate
routes that are shorter in distance but can
take more time to drive.
vehicle—specify your vehicle type to
optimize routes.
avoidances—select (place a check mark
by) the road types you want to avoid on
your routes. The nüvi uses these road
types only if alternative routes take you
too far out of your way or if no other
roads are available. If you have a MSN
®
Direct Receiver connected, you can also
avoid traffic delays.
attention tone—turn on or off the
attention tone.
voice Prompts—select when you want
the nüvi to announce route navigation
and system status.
restore—restore the original navigation
settings.