Fog light bulbs, P251) – Acura 2013 TSX User Manual
Page 252

Continued
251
uu
Replacing Light Bulbs
u
Fog Light Bulbs
4. Unhook the hook, and pull out
5. Remove the old bulb and insert the
new bulb.
6. Put the connector back into the
Fog Light Bulbs
When replacing, use the following bulbs.
1. Remove the clips using a flat-tip
screwdriver, and lower the under cover.
1
Low Beam Headlights
Insert the clip with the central pin raised, and push
until it is flat.
Push until the
pin is flat
Hook
Bulb
Connector
Fog Light: 55 W
1
Fog Light Bulbs
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
The fog lights are halogen bulbs.
When replacing a bulb, handle it by its plastic case,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Clip
Under Cover
13 ACURA TSX 4D-31TL16400.book 251 ページ 2012年7月27日 金曜日 午前11時31分
QRG
Index
2013 TSX
Main
tenan
ce
TOC
the connector.
headlight assembly.