Dot tire quality grading (u.s. vehicles) – Acura 2013 TSX User Manual
Page 263

262
uu
Checking and Maintaining Tires
u
DOT Tire Quality Grading (U.S. Vehicles)
Main
tenan
ce
DOT Tire Quality Grading (U.S. Vehicles)
1
Uniform Tire Quality Grading
13 ACURA TSX 4D-31TL16400.book 262 ページ 2012年7月27日 金曜日 午前11時31分
QRG
Index
TOC
2013 TSX
■
Uniform Tire Quality Grading
■
Treadwear
The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are
also graded for treadwear, traction, and temperature performance according to
Department of Transportation (DOT) standards. The following explains
these gradings.
Quality grades can be found where applicable on the tire sidewall between tread
houlder and maximum section width.
The treadwear grade is a comparative rating based on the wear rate of the tire
when tested under controlled conditions on a specified government test
course. For example, a tire graded 150 would wear one and one-half (1 1/2)
times as well on the government course as a tire graded 100. The relative
performance of tires depends upon the actual conditions of their use, however,
and may depart significantly from the norm due to variations in driving habits,
service practices and differences in road characteristics and climate.
For example:
Treadwear 200
Traction AA
Temperature A
All passenger car tires must conform to Federal
Safety Requirements in addition to these grades.