Acura 2011 TSX Sport Wagon - Manual (Page 189)

187
Fe
atu
re
s
Compass *
Compass Setting Menu Items
1. Turn the ignition switch to ON II .
2. Press and hold the MENU button until the
display shows the compass setting menu
list.
3. Rotate to select CALIBRATION, then
press .
4. When the display changes to PUSH CAL
START, press .
5. Drive the vehicle slowly in two circles.
The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
When you turn the ignition switch to ON II , the compass self-calibrates, and the
compass display appears.
Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
Compass
Compass Calibration
Compass operation can be affected under the
following conditions:
Driving near power lines or stations •
Crossing a bridge •
Passing a large vehicle, or driving near a large •
object that can cause a magnetic disturbance
When accessories such as antennas and roof racks
•
are mounted by magnets
Calibrate the compass in an open area.
While setting the compass:
The RETURN button returns to the previous •
screen.
The MENU button cancels the setting mode.
•
* Not available on all models
31TL7600.indb 187 2010/09/10 15:19:32