Acura Embedded AcuBrite 15″ - Manual (Page 6)

AcuBrite™ Manual User’s Manual
Screen Adjustment Operation Procedure
1. Entering the screen adjustment
The setting switches are normally at stand-by.
Push the once to display the main menu of the
screen adjustment. The adjustable items will be displayed in the
main menu.
2. Entering the settings
Use the and < Up-Key > buttons to select the
desired setting icon and push the < Menu-Key > button to enter
sub-menu.
3. Change the settings
After the sub-menu appears:
Use the and < Up-Key > buttons to change the
setting values.
4. Save
After finishing the adjustment, push the < Menu-Key > button to
memorize the setting.
5. Return & Exit the main menu
Exit the screen adjustment; push the “” button.
When no operation is done around 30 sec (default OSD
timeout), it goes back to the stand-by mode and no more
switching is accepted except
The Screen Adjustment
Main Menu < Menu-Key>
You can adjust the brightness, contrast, display colors, the
horizontal and vertical position of the display and OSD menu,
etc. through the main menu display. The and
are used to scroll through items within the menu.
The selected item is highlighted as the scrolling move along.
The < Menu-Key > key is used to activate the highlighted
item. During this state, < Menu-Key > key is used to close the
OSD menu from the screen.
Page 7
Menu key Function:
There are 7 sub pages inside the OSD manual, Brightness,
Signal Source, Sound, Color, Image, Tools, and Exit. See
below:
< Menu-Key >
Contrast &
Brightness Setup the contrast and brightness.
Signal source You can select signal source.
Speaker To adjust the volume of speakers.
Color To adjust image colors.
Picture Setup the image position and size
within the panel.
OSD OSD functions
Exit Exit setting
Page 8